![]()
It contains El Cap OS + about 500 GB of apps and data. Internal drive is dead, but before any of this happened, I made a clone of it to a FW800 drive of it using SuperDuper. This was all done as part of a two-fold goal for this 2012 Mac Mini, which is the ultimate aim: I've given up on trying to repair it or get it to boot correctly. If you can shut down normally, this isn't the problem but if you have to force-quit to shut down, it probably is. Superduper clone recovery partition password#Sudo /System/Library/Frameworks/amework/Frameworks/amework/Support/lsregister -kill -seed -lint -r -f -v -dump -domain local -domain system -domain user -domain network Įnter your Admin password when prompted. In that case, you need to Reset Launch Services by doing the following: In either case, you'll need to reinstall the OS from another drive on the system.ģ) If the real problem isn't that you can't boot but that you can't shut down completely. Likewise, if you created this drive by cloning, you won't have a Repair Partition. Superduper clone recovery partition download#From there, you can reinstall the OS - it will go to the Apple servers, download and reinstall.īTW, if you have another OS anywhere on the system, this will not work. This should take you to the Repair Partition. ![]() If you can shut down completely, try (1) then (2).ġ) Option boot: Start up with the Option key held down and select your startup disk.Ģ) if that doesn't do it, see if you can access the Repair Partition. Sometimes, the real problem isn't that you can't boot it's that you can't shut down completely. I have run disk utility Disk First Aid on the disk and it says OK.īasically, I'm stuck in Recovery Mode each time I boot.īasically, I'm stuck in Recovery Mode each time I bootAre you really? They recommended Zapping the PRAM and I did that, and that gets it to reboot out of recovery mode to a point, but about 3/4 thru, it blinks and boots into recovery mode again. I have googled solutions for this situation. I had an HDD startup drive running APFS under High Sierra.īut, unfortunately, in my case, when I restarted, it rebooted into recovery mode! Now I am stuck in recovery mode every time I restart. Last time I did this (on said friend's computer), I rebooted and all was fine. The conversion completed and it reported it was successful. Superduper clone recovery partition update#But for HDDs, you have to do it post-High Sierra update using the recovery mode method.) (Note: SDD startup drives are automatically updated to APFS as part of the High Sierra upgrade. It is done by booting into Recovery Mode and choosing "Convert to APFS" from the menu. This can be done non-destructively on startup drives (both HDDs and SSDs), and I recently did the same thing on my friend's MBP's HDD startup drive without problems. Then (fatal step) I decided to convert the HDD startup drive from HFS+ to APFS. I updated my OS from El Cap to High Sierra.Īll went well. ![]() I did this a few days ago on my friend's Mac without problems, but things went wacky this time. Where things got messy is when I converted the startup drive (a HDD, not a SSD) from HFS+ format to APFS. I have a 2012 Mac Mini and I needed to update from El Capitan to High Sierra. Need the best advice I can get, and it's a pretty specific and unusual situation. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |